Ritelite – Flexitrace
About this product
The Flexitrace system gives a compact and labour saving solution when locating non-metallic ducts and drains. This provides the benefits of a sonde and a continuous trace system in one compact unit. An improved coil size of 8.3mm diameter allows far better flexibility when rodding through small diameter ducts, 1/2 inch (12.7mm) water and gas pipes, including the joints and bends on those pipes down to a bend radius of approximately 250mm.
SONDE MODE
To locate the sonde within a non-metallic duct or drain, you need to energise the end coil, to activate the sonde. This is done by connecting both of the Flexitrace’s terminals to the generator. This will allow you to determine the endpoint and the depth of your duct or drain.
LINE MODE
To locate the direction of the non-metallic duct or drain, attach a signal generator to one of the terminals of the Flexitrace and an earth stake (or other independent earth). The Flexitrace can be pushed the length of the duct or drain and then traced along its complete length with a Cable Avoidance Tool (CAT Receiver).
Ritelite (Systems) Ltd is a British group of companies that design, manufacture and supply a range of portable lighting products, site utility products and tools, light bulbs and battery charging solutions.
Ritelite – Flexitrace
About this product
The Flexitrace system gives a compact and labour saving solution when locating non-metallic ducts and drains. This provides the benefits of a sonde and a continuous trace system in one compact unit. An improved coil size of 8.3mm diameter allows far better flexibility when rodding through small diameter ducts, 1/2 inch (12.7mm) water and gas pipes, including the joints and bends on those pipes down to a bend radius of approximately 250mm.
SONDE MODE
To locate the sonde within a non-metallic duct or drain, you need to energise the end coil, to activate the sonde. This is done by connecting both of the Flexitrace’s terminals to the generator. This will allow you to determine the endpoint and the depth of your duct or drain.
LINE MODE
To locate the direction of the non-metallic duct or drain, attach a signal generator to one of the terminals of the Flexitrace and an earth stake (or other independent earth). The Flexitrace can be pushed the length of the duct or drain and then traced along its complete length with a Cable Avoidance Tool (CAT Receiver).
Ritelite (Systems) Ltd is a British group of companies that design, manufacture and supply a range of portable lighting products, site utility products and tools, light bulbs and battery charging solutions.
About this product
The Flexitrace system gives a compact and labour saving solution when locating non-metallic ducts and drains. This provides the benefits of a sonde and a continuous trace system in one compact unit. An improved coil size of 8.3mm diameter allows far better flexibility when rodding through small diameter ducts, 1/2 inch (12.7mm) water and gas pipes, including the joints and bends on those pipes down to a bend radius of approximately 250mm.
SONDE MODE
To locate the sonde within a non-metallic duct or drain, you need to energise the end coil, to activate the sonde. This is done by connecting both of the Flexitrace’s terminals to the generator. This will allow you to determine the endpoint and the depth of your duct or drain.
LINE MODE
To locate the direction of the non-metallic duct or drain, attach a signal generator to one of the terminals of the Flexitrace and an earth stake (or other independent earth). The Flexitrace can be pushed the length of the duct or drain and then traced along its complete length with a Cable Avoidance Tool (CAT Receiver).
Ritelite (Systems) Ltd is a British group of companies that design, manufacture and supply a range of portable lighting products, site utility products and tools, light bulbs and battery charging solutions.
Ritelite – Flexitrace Features
- Highest quality 4.5mm or 6.7mm reinforced fibreglass rod complete with three 0.5mm copper trace wires.
- UV inhibited coating.
- 4.5mm fitted with a tuned coil in robust nylon housing at 8.3mm diameter.
- 6.7mm fitted with a tuned coil in robust nylon housing at 10.3mm diameter.
- Rugged steel construction with weatherproof powder coat finish.
- Incorporating compact junction box fitted with quality screw lugs suitable for attaching feeds from a signal generator by fork terminals or crocodile clips.
- Frame, 490mm high x 430mm long x 230mm wide.
Contact Us
Contact us to find out more on 03332 07 66 22 or use the form below.